12 results for "Stair" in Articles
OTHER
2 YEARS AGO
Accounting for over 60% of slip, trip and fall deaths in buildings, public stairways require the installation of precise visual cues to help people ascend and descend steps safely.
PROJECT CASE STUDIES
2 YEARS AGO
Aside from facilitating smooth traffic flow, floor and stair safety is an essential requirement to prevent fall/slip-related injuries and accidents from occurring.
OTHER
2 YEARS AGO
Proactive Maintenance to Reduce Slip, Trip & Fall Incidents
OTHER
1 YEAR AGO
When the wine spilled from the chai onto the stone of the stairs
PROJECT CASE STUDIES
1 YEAR AGO
These incredible hand finished floating stairs were completed in partnership with two of our Sydney based Geostone Approved Installers: AJM Designer Concrete and All Concrete Services.
OTHER
2 YEARS AGO
As stated in AS1428.1-2021 Clause 11.2 (b), stairs must have a handrail complying with Clause 12 installed on both sides as shown in Figures 26 (a & b).
PROJECT CASE STUDIES
2 YEARS AGO
Are your handrails designed to be compliant on stairs that are located at property boundaries?
PROJECT CASE STUDIES
2 YEARS AGO
Noted in NZS 4121:2001 Section 8.3.4, the top or bottom step of any flight of stairs shall not encroach into corridors so that the effective minimum width of the corridor on accessible routes or means of escape in fire, is compromised.
PROJECT CASE STUDIES
2 YEARS AGO
Under NZBC Clause D1 (Access Routes), Handrails shall be provided on both sides of accessible stairways and on both sides of accessible ramps where the ramp slope is steeper than 1 in 20.
PROJECT CASE STUDIES
2 YEARS AGO
Under NZBC Clause D1, there are a variety of stair types with differing requirements for stairway pitch, riser & tread lengths. This is so that people moving into, within or out of buildings can do so safely.
PROJECT CASE STUDIES
2 YEARS AGO
In accordance with AS1428.1-2009 Clause 11.1 (b), stairs that intersect at an internal corridor shall be set back in accordance with Figure 26(B), as shown below.
OTHER
2 YEARS AGO
Top mounted Handrails such as AR10, AR45 or CB30 used on stairs, require a substrate width of 1150+mm to meet the minimum 1000 mm clear between rails requirement of AS 1428 & NCC/BCA.